Irwin School Water Bath - 100 Degrees C [2537]

The new improved Irwin Water Bath is built around a standard Gratnells deep tray and so can be stored in a Gratnells trolley. The water capacity is from 3 to 8 litres and because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a normal Water Bath, thus it reaches temperature quicker. 

The 500W silicone heating element combined with the digital temperature controller will maintain the water temperature to an accuracy of +/- 1^oC, this design also provides an even temperature distribution throughout the bath and consequently requires no stirring. The design of the heating element also makes it particularly suitable for hard water areas as it can easily be removed and cleaned. Due to the reduced amount of water required the Water Bath is also lighter and easier to carry plus its unique design gives additional bench space.

In addition to the above details the Water Bath is supplied with a number of safety features including: a water level float switch to deactivate the unit should the water level drop too low, an Earth Leakage Circuit Breaker (ELCB) should an earth fault occur and a bonded water temperature sensor to ensure the correct placement when operating.

H 150mm, W312mm, D417mm, Weight 3.8kg. 5 year warranty. The water bath comes complete with full instructions and a Z-type test tube rack.