High speed pipette and burette rinsing system taking pipettes/burettes up to 600mm long. Recommended for use where radioactive, caustic and toxic materials are in use. Constructed of polyethylene which is mounted to protect tips of pipettes from breakage.
Place burettes in basket. Place basket in soaking vessel for approx. 3 hrs with detergent. Place basket in rinser. The rinser fills via the spray nozzle situated on the top rim. This eliminates back-syphoning as the water inlet is
located above and away from any contaminated waters. The contaminated water syphons out once the syphon point at the top of the rinser has been reached via the large diameter drain situated at the bottom, before
refilling automatically. During washing the burettes are housed in specially designed baskets which minimise breakages as they buffer the tips of burettes or pipettes against the soft polyethylene base. Low water flow rate
is not a problem but it is better to adjust the flow for a cycle of about 90 seconds. Requires a 13mm inner dia. outlet drain pipe to be attached and directed to a suitable drain (not included). Soaking takes the longest time so it is advisable to buy at least two baskets/soaking jars to allow further burettes to soak whilst another full basket is being washed in the rinser.
Burette washer unit 173mm x 980mm;
All Kartell items/accessories as detailed are sold separately depending on requirements